101
101
\PCB\PPE\CHECK\DIZ-BBS.ADD
\PCB\PPE\CHECK\DIZ-DEL.ME
\PCB\PPE\CHECK\DIZ-CUT.ME
\PCB\PPE\CHECK\DIZ-ADD.LST
@X0CVERiFYiNG @X0F@OPTEXT@@X0C ! PLEASE WAiT ... 
Y
Y
Y
Y
Y
Y
Y
@X0B
@X0F
-------------------------------------------------------------------------------

Line #o1:  Minimum Security Level to access the Description Editor
           (used to strip lines from FILE_ID.DIZ's - saves lines to the file
            described in line #o4)

Line #o2:  Minimum Security Level to edit his own `Uploaded by: Blue M'
           string - Don't forget to turn off your Option in your PCBSetup/G/B !
           (leave a 0 if you don't want to use this Option and if you'll still
            use the original , which is generated by PCBoard)
           (!WARNING! - May confuse your faker - coze it cannot find the correct
            uploader - but many faker check for the uploader by another way)

Line #o3:  Full Path and filename of the commercial for your BBS you wanna be
           added to your ARJ and ZIP files as a comment
           (leave it empty if you don't like to Add a commercial to ARJ and
            ZIP files)

Line #o4:  Full Path and filename of the file which contains names of files you
           want to be deleted from ZIP files
           (leave it empty if you don't like files within ZIP archives being
            deleted)

Line #o5:  Full Path and Filename of the file which contains lines of text
           you want to be cut away from FILE_ID.DIZ's (leave it empty if you
           wont use this option)

Line #o6:  A Text List which contains files you wanna be added to your
           ARJ, LHA, LZH , ZIP - You must enter the full Path including
           Driveletter of the file !
           (!WARNING! This option requires a lot of memory - about 300k
            free memory while running PCB for ZIP Files and more than 340k
            for ARJ Files ! - But only if you turned off your Swapping
            Option in your PCBSetup/G/D !)
           (leave it empty if you don't like files within ZIP archives being
            added)

Line #o7:  Text to be displayed when files will be verified that are not tested
           by Check-Diz (Simply add your old PCBTEXT line 575 in here ...)

Line #o8:  Do you want the line 'Files: 20  Newest: 04-29-94  Oldest: 04-20-94'
           displayed at end of Descriptions when ZIP files are tested ? (Y/N)

Line #o9:  Do you want the line 'File_id.Diz: 05-05-94 - Newest .Nfo: 05-05-94'
           displayed at end of Descriptions when ZIP files are tested ? (Y/N)

Line #1O:  Do you want the line 'Uploaded at 01:59:33 on Node #1' displayed at
           the end of all Descriptions ? (Y/N)

Line #11:  Do you want to use the file_id descriptor ? (Y/N)
           (Y=always displays the `big ansi')
           (N=Only displays the short string defined in line #o5 to the User)

Line #12:  Do you want to add an empty line after each upload ? (Y/N)
           (Works only correct if you turned off your `Uploaded by:' in
            your PCBSetup)
           (If you don't want to use the Editor for the `Uploaded by' String
            but want to have a `Uploaded by' String after each upload set the
            number defined in Line #o2 higher than your highest Security Level)

Line #13:  Do you want to use the 'Special Short Mode' ? (Y/N)
           (!WARNING! May confuse your Faker - or while using PCBFILER
            it may even confuse you - simply try it ...)
           (Advantage : Makes the size of your file_dirs shorter - which
            means : longer file-dirs are now possible !)
           (Decreases your file-dir size about 30% !!)

Line #14:  Do you want to use the 'Special Short Mode' for the additional
           information after each File_Id ? (Y/N)
           (If you got in Line #13 a 'N' but you want to use colors in your
            additinal informations after the File Descriptions (Line #15/16))
           (While using PCBFILER it may 'only' confuse you but Doesn't confuse
            your faker ...[i hope ;) ])

Line #15:  Color for:   'Files: '  'Newest: '  'Oldest: '
                 for:   'File_id.Diz:'  '- Newest .Nfo:'
                 for:   'Uploaded at'  'on Node'
           (The color is based upon the PCB @X color standard - if you don't
            know it - FUCK OFF ! - ;) - don't take it personally)
           (Requires a 'Y' in Line #14 !)
           (If you wanna use the normal color, you defined in your PC BOARD
            System Manager, simply leave it empty)

Line #16:  Color after: 'Files: ', after: 'Newest: ', after: 'Oldest: '
                 after: 'File_id.Diz:', after :'- Newest .Nfo:'
                 after: 'Uploaded at', after: 'on Node'
           (The color is based upon the PCB @X color standard - if you don't
            know it - FUCK OFF ! - ;) - don't take it personally)
           (Requires a 'Y' in Line #14 !)
           (If you wanna use the normal color, you defined in your PC BOARD
            System Manager, simply leave it empty)


   - Yeah - that sounds a lot - and perhaps you worry about these functions -
   - and imagine that nobody will be able to understand my comments ....... -
   - if you do so - wait for the install.exe Program coded by Camillo       -

                                              Blue M '94 - Diamonds are forever