SOFTPAQ NUMBER: SP14544 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Server Support for Microsoft Windows NT 4.0 (Network Interface Controller Drivers) VERSION: 2.18 Rev A LANGUAGE: Japanese CATEGORY: Drivers DIVISIONS: Systems PRODUCTS AFFECTED: ProLiant 400,ProLiant 800,ProLiant 850R,ProLiant 1000, ProLiant 1200,ProLiant 1200R,ProLiant 1500,ProLiant 1500R,ProLiant 1600, ProLiant 1850R,ProLiant 2000,ProLiant 2500,ProLiant 2500R,ProLiant 3000, ProLiant 3000R,ProLiant 4000,ProLiant 4500,ProLiant 4500R,ProLiant 5000, ProLiant 5000R,ProLiant 5500,ProLiant 6000,ProLiant 6400R,ProLiant 6500, ProLiant 7000,ProLiant 8000,ProLiant 8500,ProLiant CL1850,ProLiant DL380, ProLiant ML350,ProLiant ML370,ProLiant ML530,ProSignia 300,ProSignia 500, ProSignia 720,ProSignia 740,Systempro,Systempro/e,Systempro/LT,Systempro/XL OPERATING SYSTEM: Microsoft Windows NT 4.0 (Japanese) SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: June 23, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP13617 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. This SoftPaq creates two files -- a description file and a self-extracting executable file. The self-extracting executable file contains Compaq Server Support for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Servers: Compaq Ethernet, Fast Ethernet, or Gigabit Controllers and Modules Compaq NC1120 Ethernet NIC Compaq NC3120 Fast Ethernet NIC Compaq NC3122 Fast Ethernet NIC Compaq NC3123 Fast Ethernet NIC Compaq NC3131 Fast Ethernet NIC Compaq NC3132 Fast Ethernet Module Compaq NC3133 Fast Ethernet Module Compaq NC3160 Fast Ethernet NIC Compaq NC3161 Fast Ethernet NIC Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Compaq NC6134 Gigabit NIC Compaq Netelligent Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller Compaq Netelligent 10/100 TX Embedded UTP Controller Compaq NetFlex-3 Family of Controllers Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq Network Teaming and Configuration Utility Compaq Server Support Installation Utility Compaq TLAN Teaming and Configuration Utility Enhancements/Fixes: Features in Compaq SSD for Windows NT 4.0 Version 2.18 Rev. A The release of the Compaq Server Support for Microsoft Windows NT 4.0 Version 2.18 Revision A primarily supports the following new products: Compaq RAID LC2 Controller Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter Driver (ADPU160M.SYS) Added the latest file from Adaptec. Compaq Array Configuration Utility (CPQACU.EXE) Added support for the Compaq RAID LC2 Controller. Compaq Integrated Smart Array/42xx Controllers Driver (CPQARRY2.SYS) Updated the Compaq Integrated Smart Array/42xx Controllers Driver to Version 4.4.0.0 to Version 4.03.02.00. Added support for the Compaq RAID LC2 Controller. Compaq SCSI Controller Driver (CPQ32FS2.SYS) Corrected an issue involving the Compaq CD Storage System when ScsiExpressed is installed. Compaq Server Support Setup for Microsoft Windows NT 4.0 (SETUP.EXE, SETUPAPP.EXE) Added support for the Compaq RAID LC2 Controller Compaq System Management Driver (SYSMGMT.SYS, SYSDOWN.EXE) Updated Version to 3.30.01. Added support to shut down the system if critical fans are removed after the Power On Self Test (POST) completes but before the System Management driver loads. This replaces the support added in Version 3.24.01 of the driver. This change affects the following Compaq servers: ProLiant DL580 ProLiant ML570 ProLiant ML530 ProLiant DL380 ProLiant DL360 ProLiant ML370 ProLiant ML350 ProLiant ML330 ProLiant CL380 ProLiant 6400R ProLiant 6500 (Pentium II Xeon or later models with the P11 ROM) ProLiant 5500 (Pentium II or later models with the P12 ROM) ProLiant 3000 (Pentium II or later models with the P09 ROM) ProLiant 1850R ProLiant 1600 (Pentium II or later models with the P08 ROM) ProLiant 800 (Pentium II or later models with the P14 or P18 ROM) ProLiant 400 Prosignia Server 740 Prosignia Server 720 For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT NICS.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: NICS.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.