TITLE:  HP ev2200 1xEV-DO Broadband Wireless Module Software and Drivers

VERSION:  1.3.12.0 (1.00 Rev B)
DESCRIPTION:  
This package contains the software and drivers for the HP ev2200 1xEV-DO
Broadband Wireless Module in the listed notebook models and operating systems.

PURPOSE:  Routine
SOFTPAQ NUMBER:  SP32324
SUPERSEDES:  SP32006
EFFECTIVE DATE:  April 28, 2006
CATEGORY:  Driver - Network
SSM SUPPORTED:  NO

PRODUCT TYPE(S):  
Notebooks

PRODUCT MODEL(S):  
HP Compaq nc6140 Notebook PC
HP Compaq nc6320 Notebook PC
HP Compaq nc6400 Notebook PC
HP Compaq nx6320 Notebook PC

DEVICES SUPPORTED:  
HP ev2200 1xEVDO Broadband Wireless Module


OPERATING SYSTEM(S):  
Microsoft Windows 2000
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional

LANGUAGE(S):
US English

ENHANCEMENTS:  
- Updates the firmware to version 83.
- Removes Turn Audio Off option from the Preferences dialog box under Connect 
  Options. This option enabled Microsoft Internet Explorer legacy audio support 
  and is no longer needed.
- Eliminates the prompt to disconnect the Wireless WAN (WWAN) connection when 
  Microsoft Windows is restarted and an active connection exists. 
- Modifies the "Minimum View" to make the user interface smaller and more 
  usable by removing the main toolbar and replacing it with the secondary
  toolbar. This change enables users to connect and disconnect and also enables
  them to start and stop their virtual private network (VPN).
- Modifies status bar to display "Extended Network" or "Roaming" when
  notebook is connected to the WWAN but is not connected to the home network.

FIXES: 
- Fixes issue that causes the VZAccess Manager client to initiate a WWAN 
  connection when the Auto Connect option is enabled, and the Preferences dialog
  box is opened and then closed by clicking OK. 
- Fixes issue where "Power off WWAN Device" is listed in the Options menu 
  even though the WWAN device is already Powered Off.
- Fixes issue where a "WWAN device is disabled" message is displayed when
  running the VZAcess Manager Setup Wizard.

PREREQUISITES:  
None

HOW TO USE:  
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions to unpack
   the files.

3. After the files are unpacked, navigate to the folder where the files were 
   saved to and install the wireless WAN (WWAN) drivers and client 
   applications.  

   NOTE: If the default location was selected in Step 2, the unpacked files 
   are located in the \SWSetup\SP32324A folder. If you didn't choose the
   default location, use the appropriate path in the Driver, Client Manager,
   and Venturi Client Installation instructions that follow.

Driver Installation
To install the drivers, select Start, then select Run, then type msiexec /i
c:\SWSetup\SP32324A\MC5720HP.msi, and then press Enter.
(For Silent Installation, type: msiexec.exe /i MC5720HP.msi /q) 	

Client Manager Installation
To install the client manager, select Start, then select Run, then type
c:\SWSetup\SP32324A\VZAccess Manager\VZAMSetup.exe, and then press Enter.
(For Silent Installation, type: VZAMSetup.exe /S /v/"qn ALLUSERS=2")

Venturi Client Installation
To install the Venturi Client, select Start, then select Run, then type
c:\SWSetup\SP32324A\Venturi Client\VSetup.exe, and then press Enter.
(For Silent Installation, type: VSetup.exe /s /qn)


Copyright (c) 2006 Hewlett-Packard Development Company, L.P.