ZyXEL Communications Services GmbH. edited by Manfred Recla January 20, 2000 ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.05 December 31, 1999 ================================================= 1 Version information: Omni56K Plus : Omni56K : ATI1 ATI1 29588 07612 Omni56K Plus 1.05 Omni56K 1.05 1999 12 31 08:36 1999 12 31 08:45 OK OK 2. Firmware changed a. Fixed the bug that FAX and V.32 mode fail after V.90 connection. b. Fixed ATI19 behavior that some modem enter kernel mode when enter this command. c. Fixed the V.32 mode incompatibility issues with V.FC modem. d. Fixed file transfer fail when connect with ZyXEL Elite 2864 modem after ATZ0 and ATZ1 command. e. Fixed "FAX Class 1 ATD issues" that ATD command fail after a fax session. f. Fixed the bug of "ATD0W.... " command fail. g. Fixed the Fax Class 2 compatible issues with some application that can not find "0x11" pattern during fax operation. h. Improved Fax Class 1 compatibility. i. Fixed the bugs that ring detection fail after AT&T1 test. ============================================================================= ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.04 December 09, 1999 ================================================= 1 Version information: Omni56K Plus : Omni56K : ATI1 ATI1 08286 45289 Omni56K Plus 1.04 Omni56K 1.04 1999 12 09 11:26 1999 12 09 11:04 OK OK 2. Firmware changed - Only changed for ZyXEL internal request . No modem function or operation changed. ============================================================================= ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.03 November 22, 1999 ================================================= 1. Version information: Omni 56K Plus: Omni 56K: -------------- --------- ATI1 ATI1 12389 49455 Omni56K Plus 1.03 Omni56K 1.03 1999 11 22 21:20 1999 11 22 21:09 OK OK 2. Firmware modifications ------------------------- a. Added Fax Class 2 function. (AT+FCLASS=2) b. Added Russian Caller ID. c. Modified the retrain procedure for V.90 mode in Russian country code. That will force to V.34 mode if double handshaking happened in V.90 mode. d. Fixed the bug of busy tone detection fail in Russia. e. Fixed the multi-auto detection fail in fax function. f. Fixed the V.22 call connection unstable. g. Improved the "NO CARRIER" problem after long time file transfer. ============================================================================= ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.02 November 22, 1999 ================================================= Version 1.02 was skipped ! ============================================================================= ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.01 October 03, 1999 ================================================= 1. Version information: Omni 56K Plus: Omni 56K: -------------- --------- ATI1 ATI1 12389 49455 Omni56K Plus 1.01 Omni56K 1.01 1999/10/03 20:43 1999/10/03 20:43 OK OK 1.2 Fixed bugs and function improvement: a. Adjust the DAA test threshold to improve the yield rate of production. 1.3 Known bugs a. In RS232 and USB mode ,the LDL & RDL function (AT&T3) can't work. b. In USB mode, the "break" signal from DTE can not be detected. c. In USB mode, the modem can not transfer file properly in non-error control mode (when the DTE charater format was not 10 bit data format.) d. The V.90 mode fail to make connection when connect via A/B port of the "Original a/b adapter" on ZyXEL Elite 2864I. ============================================================================= ================================================= Release Note for ZyXEL Omni 56K and Omni 56K Plus Version 1.00 September 20, 1999 ================================================= 1. Version information: Omni 56K Plus: Omni 56K: -------------- --------- ATI1 ATI1 12389 49455 Omni56K Plus 1.00 Omni56K 1.00 1999/9/20 13:41 1999/9/20 21:09 OK OK 1.2 Fixed bugs and function improvement: a. Fixed the V22 compatibility issues with the USR and Lucent modem. b. Improved the stability of DTMF tone detection in voice mode. c. Fixed the bug that connection fail with Rockwell ACF-2 modem in V.34 mode. 1.3 Known bugs a. In RS232 and USB mode, the LDL & RDL function (AT&T3) can't work. b. In USB mode, the "break" signal from DTE can not be detected. c. In USB mode, the modem can not transfer file properly in non-error control mode (when the DTE charater format was not 10 bit data format.) d. The V.90 mode fail to make connection when connect via A/B port of the "Original a/b adapter" on ZyXEL Elite 2864I. 2. USB driver & INF file ============================== 2.1 Software description Version: 1.00b Version time: 1999/9/9 2.2 Fixed bugs: a. Add the non echo mode setting after hangup in INF file. b. Fixed the Voice command set. c. Fixed the modem conflict with other ZyXEL USB product. d. Improve the delay time of USB driver. e. Fix the bug that garbage data happen in data flow control in USB driver. 3. Bitware application ======================== 3.1 Software description Version: 3.30.14 Version time: 1999/9/10 3.2 Fixed bugs a. The menu option of 3-Bit ADPCM with the following sequence Voice/setup/voice system setcup/advance/format was wrong. The modem only provides 4-bit ADPCM. b. Add the caller ID feature c. Fixed the software flow control in Fax class 1 (AT+FCLASS=1)