**********************************************************************
   *                    INSTALLATION INSTRUCTIONS                       *
   *                                                                    *
   *   PLEASE PRINT OUT THESE INSTRUCTIONS OR WRITE THEM DOWN BEFORE    *
   *   STARTING THIS FLASH UPDATE UTILITY.                              *
   *                                                                    *
   **********************************************************************
   *                                                                    *
   *                 IBM PC BIOS UPDATE INSTRUCTIONS                    *
   *                                                                    *
   *        -------------------------------------------------           *
   *            THIS CODE IS FOR THE FOLLOWING MACHINE(S)               *
   *        -------------------------------------------------           *
   *                                                                    *
   *  MACHINE     DESCRIPTION                                           *
   *  ----------  ----------------------------------------------------  *
   *  2169        CELERON/PENTIUM III PROCESSOR PCs / DESKTOP           *
   *                                                                    *
   *     ----  ABOUT APPLIED FIXES OR FEATURES ADDED   ----             *
   *                                                                    *
   *  CHANGES.NEW IS ANOTHER FILE ON THIS DISKETTE THAT LISTS KNOWN     *
   *  PROBLEMS CORRECTED AND/OR FEATURES ADDED AFTER APPLYING THIS      *
   *  UPDATE TO YOUR SYSTEM - PLEASE TAKE TIME TO READ THIS FILE        *
   *  BEFORE USING THE FLASH UPDATE FACILITY                            *                    
   *                                                                    *
   **********************************************************************
   *                                                                    *
   *                    INSTALLATION INSTRUCTIONS                       *
   *                                                                    *
   *  STEPS                                                             *
   *                                                                    *
   *  1 : PLEASE MAKE NOTE OF ANY SETTINGS YOU HAVE CHANGED IN THE      *
   *      CONFIGURATION UTILITY. THEY MAY HAVE TO BE RE-ENTERED AFTER   *
   *      UPDATING THE BIOS.                                            *
   *                                                                    *
   *  2 : DISKETTE MUST BE KEPT IN WRITABLE. IF WRITE PROTECT TAB IS    *
   *      CHANGED, IT MUST BE SET TO WRITABLE POSITION.                 *
   *                                                                    *
   *  3 : PUT THE FLASH UPDATE DISKETTE IN THE DRIVE AND POWER UP THE   *
   *      SYSTEM. THE FLASH UPDATE UTILITY AWD753 WILL AUTOMATICALLY    *
   *      START AND UPDATE POST/BIOS - NOTE THE USER MUST CONFIRM       *
   *      THAT DISKETTE IS WRITE ENABLED. IF USER DO NOT NEED TO UPDATE *
   *      BIOS, SYSTEM MUST BE REBOOTED AFTER DISKETTE REMOVED.ES       *
   *                                                                    *
   *  4 : ONCE THE FLASH UPDATE PROCEDURE IS COMPLETE, SYSTEM IS        *
   *      REBOOTED TO RESTART THE SAME FLASH UPDATE DISKETTE.           *
   *      AFTER REBOOTED, A SECOND UTILITY WILL START THAT WILL ALLOW   *
   *      THE USER TO UPDATE THE SERIAL NUMBER AND MACHINE TYPE MODEL IF*
   *      YOU WISH AFTER RELOAD THE ORIGINAL MACHINE TYPE MODEL, SERIAL *
   *      NUMBER AND UUID.                                              *
   *                                                                    *
   *      FIRSTLY, THE CURRENT SERIAL NUMBER IS DISPLAYED AND YOU       *
   *      ARE ASKED IF YOU WOULD LIKE TO UPDATE IT                      *
   *                                                                    *
   *        -IF YOU ANSWER "Y" THEN YOU ARE PROMPTED TO ENTER THE       *
   *         NEW OR CORRECT SERIAL NUMBER                               *
   *        -IF YOU ANSWER "N" THEN YOU PROCEED TO THE MACHINE TYPE     *
   *         MODEL UPDATE SECTION                                       *
   *                                                                    *
   *      SECONDALY, THE CURRENT THE MACHINE TYPE MODEL IS DISPLAYED    *
   *      AND YOU ARE ASKED IF YOU WOULD LIKE TO UPDATE IT              *
   *                                                                    *
   *        -IF YOU ANSWER "Y" THEN YOU ARE PROMPTED TO ENTER THE       *
   *         NEW OR CORRECT MACHINE TYPE MODEL                          *
   *        -IF YOU ANSWER "N" THEN THE UPDATE IS COMPLETE              *
   *                                                                    *
   *  5 : ONCE THE UPDATE IS COMPLETE YOU WILL BE ASKED IF YOU WISH     *
   *      TO REBOOT THE MACHINE OR EXIT TO DOS. IF YOU EXIT TO DOS,     *
   *      YOU MUST REBOOT THE MACHINE LATER IN ORDER FOR YOUR CHANGES   *
   *      TO TAKE EFFECT. BEFORE REBOOTING, REMOVE ALL DISKETTES        *
   *                                                                    *                                                               
   **********************************************************************
   *                                                                    *
   *      FLASH PROGRAM OPTIONS                                         *
   *      ---------------------                                         *
   *                                                                    *
   *      THE DEFAULT OPERATION OF THE FLASH UPDATE PROGRAM IS TO       *
   *      PERFORM THE UPDATE AFTER USER CONFIRMATION, GIVE THE USER     *
   *      THE OPTION TO UPDATE THE SERIAL NUMBER AND MACHINE TYPE       *
   *      MODEL IF DESIRED THEN EXIT                                    *             
   *                                                                    *
   *      IN SOME SITUATIONS, (SUCH AS A LARGE ENTERPRISE WITH MANY     *
   *      SYSTEMS THAT NEED UPDATING) IT MAY BE DESIRABLE TO CREATE     *
   *      A FLASH UPDATE DISKETTE THAT REQUIRES NO MANUAL INTERVENTION  *
   *      TO PERFORM AN UPDATE OPERATION.  THIS CAN BE DONE BY          *
   *      MODIFYING THE AUTOEXEC.BAT FILE ON THIS DISKETTE WITH         *
   *      THE FOLLOWING OPTIONS (OPTIONS ARE CASE SENSITIVE):           *
   *                                                                    *
   *                                                                    *
   *      AWD753 [FILENAME1] [FILENAME2] [/SW /SW .....]                *
   *                                                                    *
   *      FILENAME1 = NEW BIOS NAME FOR FLASH PROGRAMMING               *
   *      FILENAME2 = BIOS FILE FOR BACKING UP ORIGINAL BIOS            *
   *                                                                    *
   *                                                                    *
   *      OPTIONS                                                       *
   *      -------                                                       *
   *                                                                    *
   *      /?              SHOW HELP MESSAGES                            *
   *      /py             PROGRAM FLASH MEMORY                          *
   *      /pn             NO FLASH PROGRAMMING                          *
   *      /sy             BACKUP ORIGINAL BIOS TO DISK FILE             *
   *      /sn             NO ORIGINAL BIOS BACKUP                       *
   *      /sb             SKIP BOOTBLOCK PROGRAMMING                    *
   *      /sd             SAVE DMI DATA TO FILE                         *
   *      /cp             CLEAR PNP(ESCD) DATA AFTER PROGRAMMING        *
   *      /cd             CLEAR DMI DATA AFTER PROGRAMMING              *
   *      /cc             CLEAR CMOS DATA AFTER PROGRAMMING             *
   *      /R              RESET SYSTEM AFTER PROGRAMMING                *
   *      /cks            SHOW UPDATE BINFILE CHECKSUM                  *
   *      /Tiny           OCCUPY LESS MEMORY                            *
   *      /E              RETURN TO DOS                                 *
   *      /F              USE FLASH ROUTINES IN ORIGINAL BIOS FOR       *
   *                      FLASH PROGRAMMING                             *
   *      /LD             DESTROY CMOS CHECKSUM AND NO SYSTEM HALT      *
   *                      FOR FIRST REBOOT AFTER PROGRAMMING            *
   *      /cksxxxx        COMPARE BINFILE CHECKSUM WITH xxxx            *
   *                                                                    *
   **********************************************************************